There are many ways to private a territory in Minecraft.
- Someone uses WorldGuard (hatchet)
- Someone - Towny
- And someone understands that this is yesterday and writes their own version of private messages (as we did and were right).
This article discusses the first option - WorldGuard.
Private WorldGuard
In order to claim your territory, you need to follow several steps.
Tool
Before we privatize anything, we need to allocate the territory we need. To do this we write the command
and a wooden hatchet appears in our inventory.
How are we going to work?- you ask. Very easy.
Selection
LMB is the first point. RMB is the second point. You can highlight anything with two dots. In this picture, these dots are the green and blue frame of the blocks. The red grid is a designated private area.
You can also use the commands
We will use them to designate the points in the cube where your legs are located (not on the cube, but in it). In the chat it will look like this:
If it’s too far for you to climb up (or you’re just too lazy) or you want to hide under the house, then this command is for you. In the chat we write:
//expand<кол-во кубов> <направление>
For example:
//expand 2 down (or just d)
Thus, we expanded the territory that we had allocated with the ax by 2 cubes down (not in a specific place, but over the entire area) Directions:
Down or d - down up or u - up north or n - north south or s - south east or e - east west or w - west
When you select a region, a grid appears that visually displays the boundaries of the selected region. You can remove this grid by typing the command:
Private
To private a territory in the chat, write the following commands after selecting the territory:
/region claim zone_name
So we privatized the territory to ourselves. "What if I live with a friend?" - you ask again. We write in the chat:
/region addmember zone_name friend's nickname
Removal
If you are moving somewhere or something else and you need to delete the territory, then write the following command:
/region remove zone_name
Basic commands for working with regions:
/region claim - creates a region /region addmember username - adds a user to the region. /region addowner username - adds the owner of the region. /region removemember username - removes a region user.
Subregions (subsidiary regions)
Regions can be specified as child and parent regions:
/region setparent zone_name parent zone_name
In this case, "zone_name" becomes a child region of the "parent_zone_name" region.
For such a union, you need to be on the list of owners of both regions. To remove a parent relationship, you simply do not specify the parent region, i.e.
/region setparent<регион>
If you simply select one region inside another, they will not be child and parent. Only the owner of the old region can allocate a new region that partially overlaps the old one.
Additional (edit, delete)
If you made a mistake when marking a region and have already saved it, you can select it as a selection using the command:
/region claim zone_name
You can delete a region using the command:
/region delete zone_name
If you play MineCraft, you will probably be very, very upset if griefers suddenly destroy the buildings you have created, including houses. And this is really a shame, because you spent a lot of time and effort to build them, especially since it is necessary to do this (besides, the more buildings, the better). Many gamers say that this situation is the most unpleasant of all possible. However, don't worry because it can be prevented. Fortunately, there is a special plugin that allows you to protect your legal territory by indicating it in a special way and choosing a specific name for it. This plugin is called WorldGuard, you can download it without any problems. The plugin is installed on the server on which the gamer plays and is fully compatible with any operating system.
Rules for the privacy of a territory or house in Minecraft
When you use the miracle plugin and make your own territory private, only you can do anything on it. The path there is closed to other gamers: if they try to remove the blocks, they will appear again. You can mark the territory using an ax made of wood (of course, you must know the recipe for making an ax). With this ax, two points are marked diagonally: one is placed lower, and the second is higher, after which a cuboid is mentally drawn along these points. You end up with your own territory and question how to privatize a territory or house in minecraft almost solved. For private use the following code: /region claim name, but instead of the word “name” you need to enter the name of your region. If you want to delete a private territory, use the following command for this purpose: /regiondeletename.Other commands
In addition to the above commands, there are several others that may be useful to you:/stopfire - extinguishes any fire throughout the entire game world;
/allowfire - cancels the previous command (a fire that was extinguished is turned on again);
/god - your game character will become practically invulnerable;
/god [player nickname] - makes a specific player you specify invulnerable;
/heal - restores health to your game character;
/heal [player nickname] - restores health to the player you point to;
/slay - kills your character, but this method can essentially be called suicide;
/slay [player nickname] - kills the specific player you point to;
/stack - the number of each and every item that is in your inventory will be 64;
/locate [player nickname] - the compass arrow will point to the player’s location. If the player moves to another location, the compass arrow will still point to the place where he was before moving;
/locate - the compass arrow will point to certain coordinates;
/locate - your compass arrow again points to the spawn location;
/wg reload - used to reload the plugin.
Thus, you have all the cards in your hands: you know about the existence of the plugin, you know how to use it, and you know the commands that can help you and come in handy in a given situation. Good luck in your intrusion-proof territory! We hope our guide helped answer your question. how to lock a house in minecraft
Every day reminds us that someone has wronged someone. And often “offended” is putting it mildly. And it’s good if not us. Minecraft is a small life. Here are the same troubles, only on a smaller scale.
There are normal crafters, there are those who are not good, but there are “that’s a bad word.” These third ones periodically make careless players tear out their hair and remember the need they heard from someone to secure their territory. “Come on, evil fate has no time for me,” many say. We really hope that our readers will not be reckless. Whatever, we believe that you are of a different breed. That this article will serve you well. Today you will learn what the words mean: private, privatit, deprivatit. Believe me, these are super important words.
To protect your territory in Minecraft, you just need to privatize your plot. Private territories in Minecraft– this is restricting access to it for other players, as well as limiting them from performing certain actions on it. Before privatizing a region, it, of course, needs to be allocated. For impatient readers, we’ll tell you right away that you can easily deprivate it later.
Why do you need to use private in minecraft?
How to privateize territory in minecraft? Some players ask this question, and therefore an article dedicated to this has appeared on our website especially for you. When you play on a minecraft server, you need to secure the territory, that is, your home, in order to avoid unfavorable events. Private gives you protection from griefing in Minecraft.
Griefing- this is the infliction of moral and material harm to players in computer games. If you do not protect the territory, then another player in your zone can dispose of all your property that you mined and built. In most cases, it turns out that the player who finds the player with the unclaimed territory enters the door of the house and starts breaking everything and taking things.
To avoid such cases, private security was invented, which will protect all your property, as well as things in a certain territory that you have reserved.
A sealed house will stand in safety and tranquility.
We allocate territory for private
You can select an area in Minecraft in at least three ways.
The most popular – with “hatchet” help. It is not necessary to craft an axe, just a command is enough //wand, registered in the chat. The selection itself is achieved by two clicks: one with the left button at point 1, the other with the right button at point 2. As in the figure. This method is enough, but since Minecraft offers us others, we’ll tell you about them too.
So, namber tu method . Stand at point 1 and write //pos 1. Then move your character's body to point 2. Chat entry again, this time //pos 2. Not difficult at all, right? You are almost close to privatizing your territory. But one step before “almost” to unlock it :)
Method number three . Aim at point 1 and run to the chat again and write the command - //hpos 1. You probably don’t have to tell me any more. But for some smart people, we’ll still say that then you need to aim at point 2 and write a similar command - //hpos 1.
Private commands
Once you have selected your favorite region, you urgently need to find out how to secure a territory in Minecraft. Well, it’s generally indecently easy to privatize it. Write “/rg claim [here is the name of the site]”. Brackets are for beauty, you don't need them. You come up with the name yourself. This is the basic command, but there are other necessary commands:
- /region define(/region redefine)- change of private.
- /region claim- allows you to assign a region to yourself.
- /region select- allows you to select a region.
- /region info- allows you to view information about the region. Available only when you already have a region.
- /region list- allows you to view a list of your regions.
Comment:
In order to fully private, you need to highlight not only superficially, but also in depth and height.
This can be done with a team //expand<кол-во кубов> <направление>
The direction can be selected by commands
- down - down
- up - up
A few additional useful commands
Here you could whisper: “Ciao-cocoa!”, since you have already mastered the private territory. But there is no need to rush. Yes, you have learned how to make it private, but there are still so many useful commands! And deprivatize, if that! And give other players the opportunity to use chemicals on your site! In short, keep learning.
- So here it is. If you suddenly get tired of your private property, you, as a decent crafter, will definitely need to privatize it. Otherwise, it will turn out that a whole piece of the Minecraft world will be inaccessible to others. Team “/rg remove [area name here]”- this is what will allow the deprivation of the territory.
- This and the following commands are from the category for, so to speak, advanced “privatizers”. Remember the difference between region owners and users. The former can both move and delete a region, but the latter are only allowed to build and destroy. This is important to know. So. /rg addmember [area name here] [player nickname here]– with this command we add a crafter-user.
- /rg removemember [area name here] [player nickname here]– with this directive we evict the crafter-user.
- /rg addowner [area name here] [player nickname here]– add a crafter-owner.
- /rg removeowner [area name here] [player nickname here]. If you have suspicions, hurry to get rid of the co-owner, because he is also able to say goodbye to you. In the future you will be private alone.
Everyone, starting to play Minecraft on our Minecraft servers with a launcher and mods, wondered how to privatize a territory in Minecraft, and in our case, how to privatize a territory in Minecraft on a server? In this article we will try to break everything down and explain every aspect: You will learn how to create your first region, how to allocate a territory for private, what flags are and how to use them, basic commands for working with regions and private territory in Minecraft.
Creating a region
To begin with, you need a wooden axe, which you can get with the //wand command.
Please note that a wooden ax does not cut wood!
The right mouse button is used to select the first private point, and the left mouse button is used to select the second private point. Also, to select positions, you can use the commands //hpos1 and //hpos2 (you need to look at the block that you want to mark) or //pos1 and //pos2 (you must stand on the block that you want to select as a position) .
The selection of the territory consists of a cuboid, that is, it is necessary to select diagonally.
After you enter the command //wand, you will receive the following message in the chat:
Let's start identifying the territory. We marked 2 points with a wooden ax:
The selected territory is designated in the world green mesh. If you have selected the territory incorrectly or have already selected it, but the green grid remains, you can clear the selection with the //sel command. By the way, you can select an already created region with a green grid using the /region select command
And so, we have identified a territory, but in height it occupies only 1 block. Now it is necessary expand the territory in height (Y coordinate).
You can expand or reduce the region in the following directions:
- north- north.
- south- south.
- west- west.
- east- East
- up- up.
- down- down.
- Looking at one of the cardinal directions.
- To the sky and to the bedrock.
To indicate the direction, you can use short names of the sides ( N, S, W, E, U, D).
To reduce the region, use the //contract command
You can determine the size of the region with the command //size
For clarity, examples of expanding and reducing the selected region:
The command //expand 10 up will increase the region up by 10 cubes
Using the command //contract 10 down the region will decrease from top to bottom by 10 cells
And so, we expanded the territory in height, to which we received the following messages:
As soon as we have allocated a territory, it is necessary to create a region and thereby privatize the territory.
To save a region, use the /rg claim command<название региона>. And so, I named my region DanchikMINER123, therefore, my command will look like this: /rg claim DanchikMINER123 .
If you did everything correctly, you will receive the following message:
Delete a region
To remove a region, use the /region remove command<название региона> . Only region owners can delete a region
If you made a mistake when selecting a territory, but the region has already been saved, you can select the points again and update it using the /region update command<название региона>
Region check
To check the territory for the presence of a region, take an ordinary stick and right-click on the territory:
Adding a player to a region
You can also add a player to your region using two commands: /rg addmember<ваш регион> <ник игрока>- in this case the player is added to the region as a participant. He can build on it, but he cannot rule the region itself.
Command /rg addowner<ваш регион> <имя игрока>Only worth using if you trust the player! It gives complete power over the region: you can add/remove players from it, set flags and delete the region itself.
Flags
For greater security in your region, we have invented flags. To set the flag value, use the /region flag command<название региона> <флаг> <значение флага>. Most flags available to players can have only three values - allow, deny, none (default).
| Flag | Description | Meaning* | Rights |
|---|---|---|---|
| use | vanilla buttons, things, doors, gates, music blocks, etc. | deny | All players |
| pvp | Allows or prohibits PvP in your region. | deny | All players |
| chest-access | Allows or denies use vanilla chests. | deny | All players |
| fake-players | Allows or prohibits the use of some special things from mods. When you turn on a flag in a region, other players also have the right to use special things, select a separate region. | deny | All players |
| mods | Allows or prohibits the use of things from mods. | deny | All players |
| ic2 | Allows or prohibits the use of things from the mod Industrial Craft 2. | deny | All players |
| lava-flow | Allows or denies lava flow. | allow | All players |
| water-flow | Allows or denies water flow. | allow | All players |
| vehicle-place | Allows or prohibits the installation of trolleys. | allow | All players |
* - default value.
| Flag | Description | Default value | Rights |
|---|---|---|---|
| entry | Allows or denies entry into the region. | allow | Silver/Gold/Platinum/Titanium |
| leaf-decay | Allows or prohibits leaf loss. | allow | Gold/Platinum/Titanium |
| snow-fall | Allows or denies snowfall. | allow | Gold/Platinum/Titanium |
| mob-spawning | Allows or prohibits the spawning of mobs. | allow | Platinum/Titanium |
| ice-melt | Allows or disables ice melting. | allow | Platinum/Titanium |
| invincible | Allows or denies immortality for players in the region. | deny | Titanium |
| dungeon | Denies or allows players with privileges to enter the region. | deny | Titanium |
| block-commands | Allows or denies the use of commands in the region. | deny | Titanium |
For example, let's take the flag pvp(prohibits PvP in the region), thus, to allow PvP, you need to write the following command: /region flag<название регионе>pvp allow .
Flags are also divided into groups, of which there are five in total:
Let's look at the example of a flag use:
- Create a new region, the default flag is use always in the deny value
- We add a participant to the region, we see that he cannot open doors, workbenches, tables, etc.
- To avoid this we need to enable the use flag for the group members, that is, participants
- We write the following command: /rg flag my_region -g members use allow
- Now participants can open doors, workbenches, tables, for all others the flag will be default, that is, deny
If you have already started playing on servers with other players, then you should know a few simple commands that will allow you to private house in minecraft. Private territory and your home will protect you from theft and destruction caused by other players. In fact, there is nothing difficult in creating a private and for this task you only need a wooden ax. All of the following commands should be entered into the chat and confirmed by pressing "Enter". Chat opens eng with the "T" key.
How to secure a house?
- Once you have decided on the size of the future plot, you should enter the command //wand. With its help you will receive a wooden ax, which we will use to place marks.
- Taking an ax in our hands, we set two points diagonally with it. The first is set with the left KM, and the second with the right mouse button. After each click, a message will appear in the chat about the assignment of this coordinate point on the map.
- Half the work is done, all that remains is to expand the territory down and up, this is done by two teams:
- //expand (number of blocks) up- expands the territory upward
- //expand (number of blocks) down- down. Set your number of blocks. Optimal: 20 up, 15 down.
- The only thing left to do is preserve the region by giving it a unique name. You can come up with anything, you can use your own nickname. Enter the command into the chat /rg claim region name and confirm by pressing "enter".
